...
BACK UP YOUR DATA BEFORE UPDATING YOUR FIRMWARE
For use with Web Editor v1.2
PLEASE NOTE! Bug when updating from earlier firmwares to v3.9
There is a bug related to the Bank Presets when updating from the v3.8 firmware, which causes it to load wrongly.
Solution: After backing up your data in v3.8, update the firmware to v3.9, and then reload your data in v3.9.
Bugs fixed and Improvements in v3.9.7
Fixed
In the v3.9.7 file dated2022-01-24
, a bug related to recalling presets 0-127 in Fractal Integration mode was fixed.This bug did not allow users to recall presets 0-127, but anything above that works.
Fixed
Incoming SysEx messages from USB MIDI IN is being sent out twice via the DIN5 MIDI Output, causing some issues with softwares like Strymon NixieFixed
Linked all Bank Change delays to the Bank Change Delay in the Controller SettingsNew
MIDI Song Position Pointer Cross MIDI Thru handlingNew
Trigger Message
Message TypeNew
Bank On Enter Page1 and Page2 EventsTrigger Bank Presets only when you jump to a specific Bank and Page
New
Added output masking to MIDI Clock using theUtility
message typeControl where your MIDI Clock signals get sent to
New
Added MIDI Machine Control Message Type
Bugs fixed in v3.9.6
Enhancement
Arrow symbols for preset names\u
for Up arrow,\d
for Down arrow,\l
for Left arrow,\r
for Right arrow
Fixed
Bank Change Mode up and down directions are wrong in the MC6Fixed
Preset names appearing in Bank change if they are toggled and blinkingFixed
PC Scroll with wrap-around misses first valueFixed
Toggling page using aux switch toggles too quickly if switch is held down
...
Fixed
%BP placeholder issue when triggering MIDI clock from aux switchFixed
MIDI Clock tap accuracy issue when triggering MIDI clock from aux switch
Bugs and Improvements in v3.9.4
Fixed
Set Toggle message type to Shift preset cannot shift the preset executing this message.Fixed
MIDI Clock pre-set tempo cannot be set using Long Press actionFixed
Last used bank not stored when changing banks via PC messagesEnchancement
Heel down, Toe Down and Engage/Disengage events on Expression Presets improvedNew
Added Omniport Relay message TypeNew
Added Bank Change Mode to Fixed Sw Custom Aux Switch settingNew
Added Jump to last bank function in MIDI CC implementation
Bugs fixed in v3.9.3
Fixed
[2021-11-09] Aux Switch T+R in Omniport 3 not working for the MC8Fixed
[2021-11-09] Triggering T+R for Aux switches is sometimes unreliableFixed
[2021-11-11] Bug in Global Message Parameter Update functionFixed
[2021-11-11] Bug in MIDI Type B setting for OmniportFixed
[2021-11-12] Bug in expression pedal messageWhen pedal is left in heel down or toe down positions, the heel down or toe down messages will engage when the pedal is moved.
Fixed
[2021-11-12] 0 BPM is displayed in the MC8 when controller boots up and MIDI clock is not in use.
Bugs fixed in v3.9.2
Fixed
[2021-11-05] Expression Scaled feature sends the same value for both positive and negative curves.Fixed
[2021-11-05] Looper Mode switch option need to be selected in order for Looper Mode to work. If it is turned off, Looper mode does not engageFixed
[2021-11-05] Looper Mode for aux switches is currently not available, but we will update the aux switches to always have minimal delay.Fixed
[2021-11-05] WhenCustom Bank Sequence
is turned on, saving on the editor will cause it to save it to the wrong bank.Please turn off the
Custom Bank Sequence
when editing.
Fixed
[2021-11-05]Bank Change Mode
displays wrong bank name whenCustom Bank Sequence
is active.
Breaking Changes
SysEx presets need to be reprogrammed.
CC Value Scroll messages need to be reprogrammed.
New Features
Preset Message Types
Added
Utility
message type, which allows you to:Manage Scroll Counter values
Increase/Decrease MIDI Clock BPM by 1
Clear all Preset Toggles globally
Set
Preset Message Scroll
index for selected Preset
PC Scroll
andCC Scroll
now has a wrap-around setting to allow you to wrap-around the values (go to min when value is at max), or stay at the limits (value will not increase further when at max)Added
Step Value
parameter inCC Value Scroll
message type, which allows you to increase/decrease the counter value by a specified step value.Random Waveform
added to Waveform GeneratorAdded
Model ID
option for AxeFX Tuner and integration to select betweenAxeFX III
orFM3
Added
Invert Waveform
option in WaveForm Generator message typeInverts the waveform shape
New
AxeFX Integration
message type forMC6MKII
andMC8
Enters a mode where you can select Presets and Scenes on the AxeFX 3. Scene and Preset names are retrieved from the AxeFX3.
Increased the max length for a
SysEx message
sent from a preset from 47 to 63.Added
0.25
0.50
0.75
decimal increments when using theMIDI Clock
message type to set a pre-set BPM.Added
Ignore Bank Preset On Enter
andIgnore Bank Preset On Exit
parameter in theBank Jump
messages. If enabled, Bank Presets will not execute when jumping banks with that messageControl Change
message type now has the option to use CC Value based on a selected Expression pedal positionLooper Mode
message type now lets you select what switches to apply this toAdded Preset Q, R, S, T, U, V to
Set Toggle
message forMC8
Added
All Notes
option forNote Off
message type, which will send aNote Off
command to all 128 Notes.Engage Preset
can now call the same Preset, as long as the action is different.
Expression Preset Message Types
Expression Waveform Timer
andExpression Sequencer Timer
message types for Expression Presets to control yourWaveform Engines
andSequencer Engines
interval times with your expression pedalAdded
Expression CC (Scale)
message typeScale your CC response to a logarithmic or exponential response
Added
Pitch Bend
,PC Heel Down
andPC Toe Down
message types
Preset Features
Added
Preset Toggle Groups
featureAdd your Presets to Toggle groups to have their toggle positions stay in sync with every preset in that group. For example, if Preset A in Bank 1 and Preset D in Bank 4 are in Toggle Group 1, when Bank 1 Preset A is toggled, Bank 4 Preset D will be toggled as well
Added
%BP
Placeholder to display the current MIDI Clock BPM in your Preset NameNew Preset Shift feature. Preset messages can be selected to engage only when the Preset is Shifted.
More info here: https://forum.morningstar.io/t/new-toggle-feature-shift/1632/13
Added
On First Engage
action typeA preset is
first engaged
when it is selected for the first time. Subsequent presses on the same preset will not trigger theOn First Engaged
messages, until a different preset is selected and then the preset is selected again.
Added
On Disengage
action typeA preset is
disengaged
when a different preset is selected. A bank change will not disengage a preset.
Bank Presets
Added
Bank Enter Only Once
andBank Exit Only Once
events in Bank Presets. These events will only trigger once on each controller boot up.
Controller Settings
Added
MIDI Message Converter
feature, which allows you to re-route incoming PC, CC and Note messages to different PC/CC/Note numbers and channels.Added
Load last used bank on power up
feature in global settingsData Dump format now in json.
This allows data to be loaded across different devices
Others
Added SysEx API for external applications.
...