...

Firmware Updates

v3.10.1 Firmware Update

Before Updating

• Backup your data

  • Though the update process does not affect your data at all, it is recommended that you backup your data… just in case.

• Know that if you are facing any issues with the v3.10.1 firmware, you can always downgrade your firmware back to v3.9. The links to the previous editor versions are available at the bottom of the Editor.

New Features

• NewUSB MIDI interface exposes 4 virtual MIDI ports.

  • Not an issue for MacOS users as one port can be used by multiple applications (just set the USB Virtual MIDI Ports setting in the Controller settings to 1 if not you’ll see more than 1 MIDI message for each usbMIDI command sent). Windows OS only allows 1 MIDI port to be used by 1 application, so you can’t connect the controller to, for example, Ableton and the Editor at the same time

  • The first port is meant for the Editor. Editor SysEx messages are not sent on the other ports.

• New Added MIDI Delay setting in Controller Settings

  • Increase time between PC and CC messages. Applies to PC and CC messages only

  • Some devices cannot process incoming stream of CC messages that are sent too fast.

  • More delay + more messages = more latency. Probably cannot be observed if delay is kept to 2-3ms.

• New Fixed Switch Custom action: Toggle Active Preset

• New Added Focus Mode for MC8

  • Focus Mode just displays the preset labels and nothing else.

• New Omniport Settings

  • Set Expression Sensitivity and Expression Calibration from Editor in Omniport settings.

    • Setting needs to be saved and device restarted first.

...

• Enhancement Bank Jump

  • Enhanced Bank Jump logic when Custom Bank Sequence is used

    • For Bank Jumps while Bank Arranger feature is active, the controller will search for the actual bank and not the pointer.

      • If you have a Bank Jump in Bank 1 to Bank 4, and then you move Bank 4 to Bank 6 in the Bank Arranger module, the Bank Jump in Bank 1 will now jump Bank 6.

        • If you have duplicate banks in the Bank Arranger, the Bank Jump feature will only jump to the first matched bank.

  • Bank Jump Go to last used bank option now includes Last used Bank / Page or Page

    • Jump back to the previous page on the same bank.

• Enhancement Keystrokes

  • Added Keypad numbers to keystroke options

• Enhancement Preset Utility

  • Add Reverse Message Scroll feature

    • Use a Utility message type >> Manage Preset Msg Scroll to toggle direction etc with another action

  • Scroll through multiple messages with the Manage Preset Scroll setting.

  • Preset Output Masking now includes USB virtual ports

  • Preset Output Masking Until Message option removed from Preset Output Masking. Masked outputs will stay until the end of the Preset execution cycle, or until another Preset Output Masking message is used. This allows the output masking state to remain across different actions until the Preset execution cycle is completed.

...

• Enhancement Increased global toggle positions from 16 to 22

...