Overview
Each of the 16 messages can be mapped to an action executed on the MC6.
This glossary provides the descriptions for the list of actions.
Press
A single tap to the switch.
A Long Press
action will also execute a Press
action. Hence, if you want to execute 2 different actions with a Press
and Long Press
message, you should use a Release
and Long Press
message instead.
Release
Releasing the switch after a Press action.
Long Press
A single tap to the switch that is held down for at least 600ms.
Take note: Instead of a ‘Press' action for your other messages, you should now use a ‘Release' action instead. This is because 'Press' will be triggered the moment a switch is pressed down regardless of whether it is a short or long press. Using 'Release’ will solve this issue.
Long Press Release
Releasing the switch after a Long Press action.
Double Tap
A double consecutive tap to the switch.
Does not execute a Press action
If a Preset is programmed with a Double Tap
, there will be a slight delay in sending out messages programmed with other actions such as Press
, as the controller needs to determine if a double tap action has been executed.
Double Tap Release
Releasing the switch after a Double Tap action.
Long Double Tap
A double consecutive tap to the switch that is held down for at least 600ms.
Long Double Tap Release
Releasing the switch after a Long Double Tap action.
Release All
This action groups Release and Long Press Release together.
Long Press Scroll
Available from firmware v3.7 onwards
Messages will be repeatedly engaged while the switch is held down.