Each of the 16 messages can be mapped to an action executed on the MC6. This glossary provides the descriptions for the list of actions.
A single tap to the switch.
A Long Press action will also execute a Press action. Hence, if you want to execute 2 different actions with a Press and Long Press message, you should use a Release and Long Press message instead.
Releasing the switch after a Press action.
A single tap to the switch that is held down for at least 600ms.
Take note: Instead of a ‘Press' action for your other messages, you should now use a ‘Release' action instead. This is because 'Press' will be triggered the moment a switch is pressed down regardless of whether it is a short or long press. Using 'Release’ will solve this issue.
Long Press Release
Releasing the switch after a Long Press action.
A double consecutive tap to the switch.
If a Preset is programmed with a Double Tap, there will be a slight delay in sending out messages programmed with other actions such as Press, as the controller needs to determine if a double tap action has been executed.
Double Tap Release
Releasing the switch after a Double Tap action.
Long Double Tap
A double consecutive tap to the switch that is held down for at least 600ms.
Long Double Tap Release
Releasing the switch after a Long Double Tap action.
This action groups Release and Long Press Release together.
Long Press Scroll
Available from firmware v3.7 onwards
Messages will be repeatedly engaged while the switch is held down.