Each of the 16 messages can be mapped to an action executed on the MC6. |
It is important to pair actions correctly as executing certain actions, like the Long Press, will trigger other actions as well, like a Press action.
Sequence of actions that will be executed | |||||||||
---|---|---|---|---|---|---|---|---|---|
Events | Press | Release | Long Press | Long Press Release | Double Tap | Double Tap Release | Long Double Tap | Long Double Tap Release | Release All |
When switch is | 1 | 2 | 2 | ||||||
When switch is | 1 | 2 | 3 | 3 | |||||
When switch is | 1 | 2 | 2 | ||||||
When switch is | 1 | 2 | 2 |
A single tap to the switch.
A |
Releasing the switch after a Press action.
A single tap to the switch that is held down for at least 600ms.
Take note: Instead of a ‘Press' action for your other messages, you should now use a ‘Release' action instead. This is because 'Press' will be triggered the moment a switch is pressed down regardless of whether it is a short or long press. Using 'Release’ will solve this issue. |
Releasing the switch after a Long Press action.
A double consecutive tap to the switch.
Does not execute a Press action |
If a Preset is programmed with a |
Releasing the switch after a Double Tap action.
A double consecutive tap to the switch that is held down for at least 600ms.
Releasing the switch after a Long Double Tap action.
This action groups Release and Long Press Release together.
Available from firmware v3.7 onwards |
Messages will be repeatedly engaged while the switch is held down.
Executes with
Any action
When the previous selected preset is different from the current one being engaged
When the same preset is engaged again, the Preset Messages with this On Enter
action will not execute again.
Executes with
Any action
When a different preset is selected from the current one being engaged.