Backup your data
Though the update process does not affect your data at all, it is recommended that you backup your data… just in case.
Know that if you are facing any issues with the v3.10.1 firmware, you can always downgrade your firmware back to v3.9. The links to the previous editor versions are available at the bottom of the Editor.
Check your Controller Settings. Check that the USB Virtual MIDI Ports
setting is set to 1, and then SAVE your settings.
The default USB Virtual MIDI Ports
setting might be set to 0 and no MIDI messages will be send via USB if that’s the case. The above step is just to initialise the value for this new setting.
New
USB MIDI interface exposes 4 virtual MIDI ports.
Not an issue for MacOS users as one port can be used by multiple applications (just set the USB Virtual MIDI Ports setting in the Controller settings to 1 if not you’ll see more than 1 MIDI message for each usbMIDI command sent). Windows OS only allows 1 MIDI port to be used by 1 application, so you can’t connect the controller to, for example, Ableton and the Editor at the same time
The first port is meant for the Editor. Editor SysEx messages are not sent on the other ports.
New
Added MIDI Delay setting in Controller Settings
Increase time between PC and CC messages. Applies to PC and CC messages only
Some devices cannot process incoming stream of CC messages that are sent too fast.
More delay + more messages = more latency. Probably cannot be observed if delay is kept to 2-3ms.
New
Fixed Switch Custom action: Toggle Active Preset
New
Added Focus Mode
for MC8
Focus Mode just displays the preset labels and nothing else.
New
Omniport Settings
Set Expression Sensitivity
and Expression Calibration
from Editor in Omniport settings.
Setting needs to be saved and device restarted first.
Enhancement
Fractal Integration
Scene names will update when preset is changed on the Fractal device
Selected scene name will blink
Aux switch can be used while in integration mode
Added up to 511 accessible presets for the FM3
Changed scene page to 6 scenes fo MC6 and 8 scenes for MC8
Exit button is removed. To exit the scene, press B+C
for the MC6, or C+D
for the MC8.
Added scene number polling so scenes changed directly on the Fractal will be reflected in the MC6/8.
From the Scene Select
menu, press A+B
on the MC6 and MC8 to go back to the Preset Select
menu.
Enhancement
Omniport Relay Interface
Set starting polarity in the Omniport Settings
Setting to sync Omniport Relay Interface with 8 taps automatically when MIDI clock tempo changes
Enhancement
When Omniport Fixed Switch Custom Ring setting is set to Do Nothing
, only the Tip will be active and a TS cable can be used.
Enhancement
Async expression pedal read
Use multiple expression pedals at the same time
Enhancement
Engage Preset
Added Current Bank
option for Engage Preset
Added Preset Name labels in the Engage Preset message type
Enhancement
Bank Jump
Enhanced Bank Jump
logic when Custom Bank Sequence
is used
For Bank Jumps while Bank Arranger feature is active, the controller will search for the actual bank and not the pointer.
If you have a Bank Jump in Bank 1 to Bank 4, and then you move Bank 4 to Bank 6 in the Bank Arranger module, the Bank Jump in Bank 1 will now jump Bank 6.
If you have duplicate banks in the Bank Arranger, the Bank Jump feature will only jump to the first matched bank.
Bank Jump Go to last used bank
option now includes Last used Bank / Page or Page
Jump back to the previous page on the same bank.
Enhancement
Keystrokes
Added Keypad numbers to keystroke options
Enhancement
Preset Utility
Add Reverse Message Scroll feature
Use a Utility
message type >> Manage Preset Scroll
to toggle direction etc with another action
Scroll through multiple messages with the Manage Preset Scroll
setting.
Preset Output Masking now includes USB virtual ports
Preset Output Masking Until Message
option removed from Preset Output Masking. Masked outputs will stay until the end of the Preset execution cycle, or until another Preset Output Masking message is used. This allows the output masking state to remain across different actions until the Preset execution cycle is completed.
Enhancement
Increased global toggle positions from 16 to 22
Fixed
CC#1 does not trigger bank down in MC3
Fixed
Engage preset message type does not toggle engaged preset
Fixed
Expression preset toggle channel message type bug
Fixed
Missing short name bug
Fixed
Omniport MIDI Clock sending at 4x speed
Fixed
Preset Full name display disappears very quickly
Fixed
Omniport MIDI OUT bug - message needs to be sent twice after bootup to work properly
Fixed
Engage Preset does not engage a preset in the same bank
Fixed
Fixed MC3 load last used bank on startup bug
Fixed
Fixed Cross MIDI Thru for real time Start and Continue messages
Fixed
MC3 Dual switch lock did not apply to Switch AB (Toggle page)
Fixed
Paste Preset to all banks bug
Fixed
Controller Data Dump
Fixed data dump issue where communication errors between device and editor were frequent.
BACK UP YOUR DATA BEFORE UPDATING YOUR FIRMWARE
For use with Web Editor v1.2
There is a bug related to the Bank Presets when updating from the v3.8 firmware, which causes it to load wrongly.
Solution: After backing up your data in v3.8, update the firmware to v3.9, and then reload your data in v3.9.
Fixed
In the v3.9.7 file dated 2022-01-24
, a bug related to recalling presets 0-127 in Fractal Integration mode was fixed.
This bug did not allow users to recall presets 0-127, but anything above that works.
Fixed
Incoming SysEx messages from USB MIDI IN is being sent out twice via the DIN5 MIDI Output, causing some issues with softwares like Strymon Nixie
Fixed
Linked all Bank Change delays to the Bank Change Delay in the Controller Settings
New
MIDI Song Position Pointer Cross MIDI Thru handling
New
Trigger Message
Message Type
New
Bank On Enter Page1 and Page2 Events
Trigger Bank Presets only when you jump to a specific Bank and Page
New
Added output masking to MIDI Clock using the Utility
message type
Control where your MIDI Clock signals get sent to
New
Added MIDI Machine Control Message Type
Enhancement
Arrow symbols for preset names
\u
for Up arrow, \d
for Down arrow, \l
for Left arrow, \r
for Right arrow
Fixed
Bank Change Mode up and down directions are wrong in the MC6
Fixed
Preset names appearing in Bank change if they are toggled and blinking
Fixed
PC Scroll with wrap-around misses first value
Fixed
Toggling page using aux switch toggles too quickly if switch is held down
Fixed
%BP placeholder issue when triggering MIDI clock from aux switch
Fixed
MIDI Clock tap accuracy issue when triggering MIDI clock from aux switch
Fixed
Set Toggle message type to Shift preset cannot shift the preset executing this message.
Fixed
MIDI Clock pre-set tempo cannot be set using Long Press action
Fixed
Last used bank not stored when changing banks via PC messages
Enchancement
Heel down, Toe Down and Engage/Disengage events on Expression Presets improved
New
Added Omniport Relay message Type
New
Added Bank Change Mode to Fixed Sw Custom Aux Switch setting
New
Added Jump to last bank function in MIDI CC implementation
Fixed
[2021-11-09] Aux Switch T+R in Omniport 3 not working for the MC8
Fixed
[2021-11-09] Triggering T+R for Aux switches is sometimes unreliable
Fixed
[2021-11-11] Bug in Global Message Parameter Update function
Fixed
[2021-11-11] Bug in MIDI Type B setting for Omniport
Fixed
[2021-11-12] Bug in expression pedal message
When pedal is left in heel down or toe down positions, the heel down or toe down messages will engage when the pedal is moved.
Fixed
[2021-11-12] 0 BPM is displayed in the MC8 when controller boots up and MIDI clock is not in use.
Fixed
[2021-11-05] Expression Scaled feature sends the same value for both positive and negative curves.
Fixed
[2021-11-05] Looper Mode switch option need to be selected in order for Looper Mode to work. If it is turned off, Looper mode does not engage
Fixed
[2021-11-05] Looper Mode for aux switches is currently not available, but we will update the aux switches to always have minimal delay.
Fixed
[2021-11-05] When Custom Bank Sequence
is turned on, saving on the editor will cause it to save it to the wrong bank.
Please turn off the Custom Bank Sequence
when editing.
Fixed
[2021-11-05] Bank Change Mode
displays wrong bank name when Custom Bank Sequence
is active.
SysEx presets need to be reprogrammed.
CC Value Scroll messages need to be reprogrammed.
Added Utility
message type, which allows you to:
Manage Scroll Counter values
Increase/Decrease MIDI Clock BPM by 1
Clear all Preset Toggles globally
Set Preset Message Scroll
index for selected Preset
PC Scroll
and CC Scroll
now has a wrap-around setting to allow you to wrap-around the values (go to min when value is at max), or stay at the limits (value will not increase further when at max)
Added Step Value
parameter in CC Value Scroll
message type, which allows you to increase/decrease the counter value by a specified step value.
Random Waveform
added to Waveform Generator
Added Model ID
option for AxeFX Tuner and integration to select between AxeFX III
or FM3
Added Invert Waveform
option in WaveForm Generator message type
Inverts the waveform shape
New AxeFX Integration
message type for MC6MKII
and MC8
Enters a mode where you can select Presets and Scenes on the AxeFX 3. Scene and Preset names are retrieved from the AxeFX3.
Increased the max length for a SysEx message
sent from a preset from 47 to 63.
Added 0.25
0.50
0.75
decimal increments when using the MIDI Clock
message type to set a pre-set BPM.
Added Ignore Bank Preset On Enter
and Ignore Bank Preset On Exit
parameter in the Bank Jump
messages. If enabled, Bank Presets will not execute when jumping banks with that message
Control Change
message type now has the option to use CC Value based on a selected Expression pedal position
Looper Mode
message type now lets you select what switches to apply this to
Added Preset Q, R, S, T, U, V to Set Toggle
message for MC8
Added All Notes
option for Note Off
message type, which will send a Note Off
command to all 128 Notes.
Engage Preset
can now call the same Preset, as long as the action is different.
Expression Waveform Timer
and Expression Sequencer Timer
message types for Expression Presets to control your Waveform Engines
and Sequencer Engines
interval times with your expression pedal
Added Expression CC (Scale)
message type
Scale your CC response to a logarithmic or exponential response
Added Pitch Bend
, PC Heel Down
and PC Toe Down
message types
Added Preset Toggle Groups
feature
Add your Presets to Toggle groups to have their toggle positions stay in sync with every preset in that group. For example, if Preset A in Bank 1 and Preset D in Bank 4 are in Toggle Group 1, when Bank 1 Preset A is toggled, Bank 4 Preset D will be toggled as well
Added %BP
Placeholder to display the current MIDI Clock BPM in your Preset Name
New Preset Shift feature. Preset messages can be selected to engage only when the Preset is Shifted.
More info here: https://forum.morningstar.io/t/new-toggle-feature-shift/1632/13
Added On First Engage
action type
A preset is first engaged
when it is selected for the first time. Subsequent presses on the same preset will not trigger the On First Engaged
messages, until a different preset is selected and then the preset is selected again.
Added On Disengage
action type
A preset is disengaged
when a different preset is selected. A bank change will not disengage a preset.
Added Bank Enter Only Once
and Bank Exit Only Once
events in Bank Presets. These events will only trigger once on each controller boot up.
Added MIDI Message Converter
feature, which allows you to re-route incoming PC, CC and Note messages to different PC/CC/Note numbers and channels.
Added Load last used bank on power up
feature in global settings
Data Dump format now in json.
This allows data to be loaded across different devices
Added SysEx API for external applications.
Bank and Preset selection boxes will open when the mouser cursor is hovered over the selection dropdown
Box will close when the cursor leaves.
If box is dragged to a new position, it will remain open until the close button is clicked.
New
Added multi message copying feature
New
Floating control panel to select presets
New
Added hot keys to select presets https://morningstarengineering.atlassian.net/wiki/spaces/MMS/pages/931299334/Editor+v1.2.4+Manual#Hot-Keys
New
Added Light mode
Fixed
Bug where Msg16 does not load in the editor
New Controller Settings backup function
New Activity monitor
feature
Monitor the execution of messages for your Presets and Bank Presets, so you know what exactly is happening when you engage a preset
MSB and LSB value calculator under Preset Settings
>> Tools
New Global Message Parameter Update function
Update Preset Messages with the same parameters together
New SysEx creation utility
under Preset Settings
>> Tools
to help you create a Preset sending SysEx messages
Updated User Library
interface
New Data Backup Manager
feature in Controller Backup
Pick and choose banks from your backup files before uploading them to the Controller
Web Editor can now be installed as a Chrome Web App, which will be available when you are offline
New Preset Template Utility
under Preset Settings
>> Tools
Select from a list of example templates to populate your preset settings