To download a PDF copy of this manual, click on the file below.
| View file | ||
|---|---|---|
|
Print in the browser and then “Save as PDF”
Introduction
Welcome to your ML5 Midi Controlled Switcher. This is a MIDI controlled audio loop switcher that enables you to make your non-MIDI-capable effects part of your midi controller presets, giving you total control of your rig.
...
Press this button to put the ML5 in learn mode. When the Learn button is blinking, the ML5 is in learn mode.
To exit Learn Mode without saving anything, press the Learn button again. There are some variations across builds. If pressing the Learn button does not exit Learn mode, you'll need to press Switch E to exit Learn Mode.
Side Panel
...
MIDI Out
This is where MIDI messages flow out/thru from the ML5. This allows you to chain the ML5 with other devices. The ML5 does not generate any MIDI messages itself.
...
Saving a preset is simple:
Choose which loops you would like to be engaged in your preset. Do so by pressing on switches A to E. If a switch is lit, that particular loop is engaged. In the image above, loops A, C and D are engaged.
Press the Learn button. The Learn button will blink, indicating that the ML5 is in Learn mode.
Send a Program Change message of your choice from your midi controller. The Learn button will flash quickly, indicating that your preset has been saved. The selected loops will be engaged every time the ML5 receives the chosen PC message.
...
Global Settings
MIDI Channel
...