Table of Content
...
Read about all the MIDI message types available here: MIDI Type Glossary .
Read about all the Action types available here: Action Glossary .
Important things to note
...
| Note |
|---|
The device requires a power supply of at least 80mA 120mA at 9VDC |
...
Connections
Information on all the inputs and outputs on the MC6.
...
You should only use STEREO CABLES. Using Mono cables will cause the device not to work as intended.
| Note |
|---|
Please do not apply any power to these inputs! |
...
Using External Aux Switches
...
The Main Configuration Menu can also be accessed by going into the Edit Settings page (Switch D+F) and selecting GblConfig.
| Note |
|---|
Please note that the controller will restart after exiting the Main Configuration Menu. |
The display will indicate that it is booting into the configuration page.
...
More information can be found in theAction Glossary.
MIDI Thru
The MC6 MKII can be programmed to pass incoming MIDI signals from the MIDI IN port to the MIDI OUT port. It can also pass CC, PC and Note messages thru to the USB port. The MC6 MKII will also pass incoming CC, PC and Note MIDI signals from the USB MIDI port to the MIDI OUT port.
...
The next menu allows you to select the action to assign to the message. Once selected, each time that action is carried out on the corresponding preset switch, only the messages assigned to that action will be invoked. You can read about all the action types available here: Action Glossary .
Edit Toggle Position
...
The next menu allows you to edit the message toggle position. Select between On and Off. This allows only the messages that match the current preset toggle position to be invoked.
...
The next menu allows you to edit the Message Type. Scroll up and down to select the Midi Type that you want to be associated with the message. You can read about the full list of Midi Types available in the Glossary here: MIDI Type Glossary .
Edit Type Parameters
Depending the Midi Type that is selected in the previous menu, unique parameter edit menus will be loaded. Edit your parameters and then press Save on the last page to save your settings.
...
It is possible to display the PC Scroll number in the Preset name. More info Adding PC Scroll Numbers to your Short Name / Toggle Name.
Controls - Moving the cursor. To move the cursor left and right, press Switch D or Switch E.
...
The links are available on our website here: https://www.morningstarfx.com/editor
| Note |
|---|
NOTE: A number of functions are disabled when the device is in Editor mode. When using or testing the MC6 with other devices, please remember to toggle out of editor mode. |
Connecting the device
Connect the device via USB to your computer and launch the editor in the latest version of Google Chrome (the Web Editor works on Google Chrome only).
...