...
Connect your AxeFX MIDI Out to the controller MIDI In, and controller MIDI Out to your AxeFX MIDI In. Turn off MIDI THRU on the controller so that any MIDI messages that are sent don’t travel in a loop.
...
Morningstar ML10X
Info |
---|
This message type sends out a SysEx message to the ML10X. Some MIDI devices do not pass SysEx messages though, like the Line 6 HX Stomp and Hologram Microcosm. If you are having troubles controlling the ML10X with this message type, please check if your MIDI devices in-between the controller and ML10X can pass SysEx messages through. |
Description
Allows you to control a Morningstar ML10X Loop Switcher.
The Device ID setting needs to match the Device ID of your ML10X. If it is set to Omni, it will broadcast to all Device IDs.
The Type setting will determine what type of control message to send.
Set Loops
Selected loops will be engaged while unselected loops will be disengaged.
Engage Loops
Selected loops will be engaged
Bypass Loops
Selected loops will be bypassed
Toggle Loops
Selected loops will be toggled i.e. If a loop is already engaged, it will be bypassed, and vice versa
Scroll Up
Scroll up a preset
Scroll Down
Scroll down a preset
Select Preset
Jump to a selected bank and preset
...
Morningstar Relay Interface
Description
Controls the Omniport if a Morningstar Relay Interface device is connected to it.
On the MC6 PRO, it also controls the Relay ports.
...
Expression Pedal
Expression CC (Linear)
...