...
Set Message Scroll Counter
Set the pointer to the selected message if using the Preset Message Scroll feature
Clear Global Preset Toggles
Clears the toggle states (including
Global Preset Toggles
) of all presets in all banks
Increase MIDI Clock BPM by 1
Decease MIDI Clock BPM by 1
Set Scroll Counter Values
Manage the
Scroll Counter
values
Mask MIDI Outputs
Allows you to, instead of sending MIDI messages out through all MIDI Outputs, limit (or mask) the MIDI outputs until the specified message number..
In the example below, the controller is sending CC#1 to the DIN5 MIDI Output only, and CC#3 to the USB MIDI Port 1 only.
...
Manage Message Scroll
Set/change message scroll direction
Set number of messages to be sent with each scroll step
Here is an example on how to scroll through 2 messages:
...
...
Trigger Messages
Description
...
Connect your AxeFX MIDI Out to the controller MIDI In, and controller MIDI Out to your AxeFX MIDI In. Turn off MIDI THRU on the controller so that any MIDI messages that are sent don’t travel in a loop.
...
Morningstar ML10X
Info |
---|
This message type sends out a SysEx message to the ML10X. Some MIDI devices do not pass SysEx messages though, like the Line 6 HX Stomp and Hologram Microcosm. If you are having troubles controlling the ML10X with this message type, please check if your MIDI devices in-between the controller and ML10X can pass SysEx messages through. |
Description
Allows you to control a Morningstar ML10X Loop Switcher.
The Device ID setting needs to match the Device ID of your ML10X. If it is set to Omni, it will broadcast to all Device IDs.
The Type setting will determine what type of control message to send.
Set Loops
Selected loops will be engaged while unselected loops will be disengaged.
Engage Loops
Selected loops will be engaged
Bypass Loops
Selected loops will be bypassed
Toggle Loops
Selected loops will be toggled i.e. If a loop is already engaged, it will be bypassed, and vice versa
Scroll Up
Scroll up a preset
Scroll Down
Scroll down a preset
Select Preset
Jump to a selected bank and preset
...
Relay Switching
Description
Controls Relay Ports on the MC6 PRO for relay switching. As explained and demonstrated in this video.
Controls the the Morningstar Relay Interface if it is connected to an Omniport on the MIDI controller.
...
Preset Rename
Description
Changes the switch name. Limited to only 4 characters on MC3, MC6 MKII and MC8.
...
Expression Pedal
Expression CC (Linear)
...
Toggles the MIDI channel for a selected Expression CC message between 2 values each time the Expression hits the toe down position.
Parameters
Message Number: Select the expression message number you want this message to change
Channel 1: First channel value
Channel 2: Second channel value
...
Toe Down Toggle CC
Available from Firmware
Status | ||||
---|---|---|---|---|
|
...
Toggles the CC Number for a selected Expression CC message between 2 numbers each time the Expression hits the toe down position.
Parameters
Message Number: Select the Expression message you want to affect
CC 1: First CC Number
CC 2: Second CC Number
...
Send CC on Engage
Available from Firmware
Status | ||||
---|---|---|---|---|
|
...