Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Info

Each of the 16 messages can be mapped to an action executed on the MC6.
This glossary provides the descriptions for the list of actions.

Table of Contents
Note

Bank Jump messages will only execute at the end of the cycle. For example, if you have a Bank Jump message programmed with a Press action, it will only execute when you release the switch.

It is important to pair actions correctly as executing certain actions, like the Long Press, will trigger other actions as well, like a Press action.

Sequence of actions that will be executed

Events

Press

Release

Long Press

Long Press Release

Double Tap

Double Tap Release

Long Double Tap

Long Double Tap Release

Release All

When switch is pressed and released

1

2

2

When switch is pressed, held down, and released

1

2

3

3

When switch is double tapped and released

1

2

2

When switch is double tapped, held down and released

1

2

2

Press

A single tap to the switch.

...

On First Engage

Executes with

  1. Any action

  2. When the previous selected preset is different from the current one being engaged

When the same preset is engaged again, the Preset Messages with this On First Engage action will not execute again. When this action is engaged, other messages mapped with actions like Press will also engage.

...

On First Engage (send only this)

Executes with

  1. Any action

  2. When the previous selected preset is different from the current one being engaged

Similar to the On First Engage action, but this action, if executed, will skip any other action like Press etc. This allows you to execute certain messages in a Preset on first engage first, before executing other messages mapped with actions like Press in subsequent presses.

On Disengage

Executes with

  1. Any action

  2. When a different preset is selected from the current one being engaged.

Example

If Preset B is programmed with a On Disengage message, and the currently selected Preset is Preset B, if you engage Preset A, the On Disengage message in Preset B will execute.

...