...
The MC6 PRO requires aux switches that are wired like in the schematic below. It has to be connected to the device with a stereo cable, where the Tip is connected to the ground via a SPST Footswitch, and similar to the Ring as well. Another switch can be added to connect both Tip and Ring to ground to engage an additional preset/setting. Please refer to the schematic below.
| Info |
|---|
Here Below are a few builders that offer such switches (we . Analog Endeavors - https://www.analogendeavors.com/category/aux American Loopers - https://www.americanloopers.com/collections/aux-switches-tap-tempos PdLs (3D Printed) - https://pdls3d.myshopify.com/collections/custom-extension-switches |
| Info |
|---|
The footswitches need to be Momentary (non latching) and Normally Open |
...
Dual switch press combinations allow you to control certain utility functions and access hidden presets beyond the first 16 presets.
Switches | Utility FunctionSwitches |
|---|---|
A + B | Bank Down |
AB + BC | Bank Up |
BD + CE | PageDown |
DE + EF | Page Up |
A + D | Engage Preset I |
B + E | Engage Preset J |
C + F | Engage Preset K |
...
MIDI Implementation
The MC6 PRO can be controlled by external MIDI controllers.
...