...
If Show Tap Menu is selected, your Morningstar MIDI controller will load the tap tempo screen when the preset is activated, showing either the selected BPM, or the current BPM if the Use Current BPM Setting is selected.
...
From the the Tap Menu, you can tap in, or increase/decrease your BPM. You can then save this new BPM to the switch preset by either pressing ‘Save’ (for the MC8 and MC6 PRO) or holding down the ‘Exit’ switch (for MC3 and MC6). This new BPM will apply to the switch preset permanently from now on.
If Show Tap Menu is not selected, your Morningstar MIDI controller will send out the MIDI Clock messages according to the preset tempo. When another event occurs i.e. a switch is pressed or expression is moved, the Midi Clock messages will stop.
...
For Preset + Scene, the controller will first display the Preset Select mode, and when a preset is selected, the controller will engage that preset on the AxeFX III, and then move on to Scene Select mode.
| Info |
|---|
Things to note
|
...
Morningstar ML10X
| Info |
|---|
This message type sends out a SysEx message to the ML10X. Some MIDI devices do not pass SysEx messages though, like the Line 6 HX Stomp and Hologram Microcosm. If you are having troubles controlling the ML10X with this message type, please check if your MIDI devices in-between the controller and ML10X can pass SysEx messages through. |
...