...
If Show Tap Menu is selected, your Morningstar MIDI controller will load the tap tempo screen when the preset is activated, showing either the selected BPM, or the current BPM if the Use Current BPM Setting is selected.
...
From the the Tap Menu, you can tap in, or increase/decrease your BPM. You can then save this new BPM to the switch preset by either pressing ‘Save’ (for the MC8 and MC6 PRO) or holding down the ‘Exit’ switch (for MC3 and MC6). This new BPM will apply to the switch preset permanently from now on.
If Show Tap Menu is not selected, your Morningstar MIDI controller will send out the MIDI Clock messages according to the preset tempo. When another event occurs i.e. a switch is pressed or expression is moved, the Midi Clock messages will stop.
...
You can select what page you want to jump to (Page 1 or Page 2-2 or 1-4, depending on your controller).
When the ‘Last Used Bank’ option is set to Yes, the device will jump to the last used bank. For example, if you banked up from Bank 3 to Bank 4, and you use Bank Jump with ‘Last Used Bank’ engaged, the device will jump back to Bank 3.
...
Each bank on your MIDI controller has 2 or 4 pages, depending on your controller model. Toggle Page allows you to toggle between these 2 the available pages. By default, your MIDI controller will display page 1. By toggling changing the page, the second a new page of presets (3 for the MC3, 6 for the MC6, 8 for the MC8) will be displayed on the screen, and you can control them with the foot switches.
...
Description
Bank down on your Strymon Timeline, Möbius and Bigsky
...
AxeFX Tuner
| Info |
|---|
Only works with the MC6MKII and MC8. This will not work with the MC3 as it does not have a MIDI IN port. |
...
| Note |
|---|
Please note that this message does not work while you are in Editor Mode. Toggle out of Editor Mode to enable the full functionalities of this message. |
...
Kemper Tuner
| Info |
|---|
Only works with the MC6MKII and MC8. This will not work with the MC3 as it does not have a MIDI IN port. |
...
| Note |
|---|
Please note that this message does not work while you are in Editor Mode. Toggle out of Editor Mode to enable the full functionalities of this message. |
...
Fractal Integration
...
| Info |
|---|
Only works with the MC6MKII and MC8. This will not work with the MC3 as it does not have a MIDI IN port. |
...
For Preset + Scene, the controller will first display the Preset Select mode, and when a preset is selected, the controller will engage that preset on the AxeFX III, and then move on to Scene Select mode.
| Info |
|---|
Things to note
|
...
Morningstar ML10X
| Info |
|---|
This message type sends out a SysEx message to the ML10X. Some MIDI devices do not pass SysEx messages though, like the Line 6 HX Stomp and Hologram Microcosm. If you are having troubles controlling the ML10X with this message type, please check if your MIDI devices in-between the controller and ML10X can pass SysEx messages through. |
...
Controls the the Morningstar Relay Interface if it is connected to an Omniport on the MIDI controller.
...
Preset Rename
Description
Changes Temporarily changes the switch Preset name. Limited to only 4 characters on MC3, MC6 MKII and MC8.
...