...
| Info |
|---|
Each of the 16 messages can be mapped to an action executed on the MC6. |
| Table of Contents |
|---|
| Note |
|---|
Bank Jump messages will only execute at the end of the cycle. For example, if you have a Bank Jump message programmed with a Press action, it will only execute when you release the switch. |
It is important to pair actions correctly as executing certain actions, like the Long Press, will trigger other actions as well, like a Press action.
Sequence of actions that will be executed | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Events | Press | Release | Long Press | Long Press Release | Double Tap | Double Tap Release | Long Double Tap | Long Double Tap Release | Release All |
When switch is | 1 | 2 | 2 | ||||||
When switch is | 1 | 2 | 3 | 3 | |||||
When switch is | 1 | 2 | 2 | ||||||
When switch is | 1 | 2 | 2 | ||||||
Press
A single tap to the switch.
...
On First Engage
Executes with
Any action
When the previous selected preset is different from the current one being engaged
When the same preset is engaged again, the Preset Messages with this On First Engage action will not execute again. When this action is engaged, other messages mapped with actions like Press will also engage.
...
On First Engage (send only this)
Executes with
Any action
When the previous selected preset is different from the current one being engaged
Similar to the On First Engage action, but this action, if executed, will skip any other action like Press etc. This allows you to execute certain messages in a Preset on first engage first, before executing other messages mapped with actions like Press in subsequent presses.
On Disengage
Executes with
Any action
When a different preset is selected from the current one being engaged.
Example
If Preset B is programmed with a On Disengage message, and the currently selected Preset is Preset B, if you engage Preset A, the On Disengage message in Preset B will execute.
...