Overview

The Omniport Relay Interface (ORI) allows you to interface the Omniports on your MC3 / MC6MKII / MC8 with other devices that has switching inputs.

...

• Power - when the ORI is connected to a power source

• Tip - When the Tip connection is shorted to Ground

• Ring - When the Ring connection is shorted to Ground

Relay Out

The Relay Out jack is a TRS jack that switches by pulling the

• Tip to Ground

• Ring to Ground

• Tip and Ring to Ground

Configure Omniport Settings

In the Configure Omniport settings for your MIDI controller, set the port to Ext Omniport Relay Interface

...

After which, connect a TRS cable from the Omniport to the Omniport In jack in the ORI.

Program your Preset

To control the ORI, simply program a preset in your MIDI Controller. Use the Morningstar Relay Interface message type, then select the Omniport that your ORI is connected to.

...

• Tap - NO

  • Shorts the connection to ground momentarily before reverting back to a Normally Open (NO) connection

• Tap - NC

  • Breaks the connection to ground momentarily before reverting back to a Normally Closed (NC) connection

• Engage

  • Connect to ground

• Disengage

  • Break the connection from ground

• Toggle

  • Toggle between engage and disengage

Requirements

Power

Requires at least 80mA at 9vDC

Specifications

Relay Contact Rating

120VAC / 24VDC at 1A