Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Info

It is possible to display the PC Scroll number in the Preset name by entering a placeholder %E0 to %EF . Since there are 16 slots in the PC Scroll function, %E0 will display the number in the first slot, while %EF will display the number in the 16th slot. %E1 will display the number in the second slot.

The count goes as such: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F

If you use %F, this will offset the counter by 1, so the name will indicate 1-128 instead of 0-127.

...

PC Scroll Down

Similar to PC Scroll Up.

...

CC Value Scroll

Info

Available in firmware v3.8 and onwards only

Description

Allows you to send a PC CC message with a PC Number CC Value that is derived from Counters 0-F (or 1 - 16) in the Controller Settings, under the Scroll Counter tab.

Under the Scroll Type parameter, there are a few options to choose:

  • Send Only

    • Sends the PC CC message with the number a specified number. The CC Value is based on the selected counter

  • Increase by 1 and send

    • Increases the value in the counter by 1 and then sends the PC CC message

  • Decrease by 1 and send

    • Decreases the value in the counter by 1 and then sends the PC CC message

  • Update only

    • Changes the value in the counter to the specified value

  • Reset only

    • Resets the counter value to the default value specified in the Controller Scroll Counter settings

...

PC Number Scroll

Info

Available in firmware v3.8 and onwards only

Description

Allows you to send a CC PC message with a CC Value PC Number that is derived from Counters 0-F (or 1 - 16) in the Controller Settings, under the Scroll Counter tab.

Under the Scroll Type parameter, there are a few options to choose:

  • Send Only

    • Sends the CC PC message with a specified number. The CC Value is the number based on the selected counter

  • Increase by 1 and send

    • Increases the value in the counter by 1 and then sends the CC PC message

  • Decrease by 1 and send

    • Decreases the value in the counter by 1 and then sends the CC PC message

  • Update only

    • Changes the value in the counter to the specified value

  • Reset only

    • Resets the counter value to the default value specified in the Controller Scroll Counter settings

PC Number Scroll

Description

Info

Please use the new PC Number Scroll message type in v3.8

...

...

CC Waveform Generator

Available from Firmware

Status
colourYellow
titlev3.7
onwards

...