...
The MC6 PRO requires aux switches that are wired like in the schematic below. It has to be connected to the device with a stereo cable, where the Tip is connected to the ground via a SPST Footswitch, and similar to the Ring as well. Another switch can be added to connect both Tip and Ring to ground to engage an additional preset/setting. Please refer to the schematic below.
| Info |
|---|
Here Below are a few builders that offer such switches (we . Analog Endeavors - https://www.analogendeavors.com/category/aux American Loopers - https://www.americanloopers.com/collections/aux-switches-tap-tempos PdLs (3D Printed) - https://pdls3d.myshopify.com/collections/custom-extension-switches |
| Info |
|---|
The footswitches need to be Momentary (non latching) and Normally Open |
...